How Septic Tanks work and When to empty them!

 

If that is not the case, if there is a problem, it is simply not a pleasant experience. Generally, these sysSeptic systems are excellent when they work properly without problems.tems that appear to be quite robust are actually somewhat sensitive and can’t withstand many cases of abuse before making a backup or some other type of problem begins to occur. The great way to prevent these difficulties from occurring, as well as to keep any of these systems working well, is to avoid anything that could cause damage or blockages in the first place.

Septic Tank Sewage Treatment Systems

These offer a very crude process of treating wastewater for properties that are not connected to the network drain. Several septic tank systems around the world are never maintained and, therefore, do not function properly and there are pollution control laws to try to limit the amount of environmental and health risks they cause. These laws are becoming stricter and minimum standards have been established for new septic systems. In several cases, you will need to install a wastewater treatment plant system. Always have an expert in wastewater systems verify the sewer system before buying a property to avoid a contamination problem.

How a Septic Tank Works

Untreated sewage and wastewater from bathrooms, kitchens, etc. they are discharged into the tank where the solids are separated from the liquid waste. Fats and oils float to the top of the tank and form a layer of crust. The feces and food debris sink to the bottom of the tank and form a layer of mud. The anaerobic bacteria that are natural colonizers in the tank “digest” this sludge up to 75%.

Dirty septic water flows from the tank into a drainage field. Baffles or “T” pipes in the tank retain the floating crust and prevent it from entering the tank outlet. So that the layers of mud and bark do not become too deep, the septic tanks must be emptied yearly. In addition, this prevents a higher concentration of suspended solids that are washed in the soakaway. Solids can block air spaces in the soil drainage system, preparing a drainage problem and septic tank effluent will not be able to absorb or be treated by natural soil bacteria.

Septic Tank Emptying

If there is too much sludge in your septic tank, this decreases the capacity of the tank, which means that there is less space for incoming debris and reduces the time it has to decompose. Therefore, this could push debris into the pipes, most likely to clog them and cause the entire system to stop stinking. A large amount of sludge will enhance the likelihood of solids escaping from the tank and damaging the surrounding environment.

The frequency with which your tank should be emptied may depend on the size of the type of construction and the use that is provided to it. The different tanks require various pumping frequencies. It is recommended that you monitor when your septic tank was last emptied and the amount of sludge that was detached that will allow you to calculate when it will be necessary to empty your tank again. A more efficient owner is a more effective tank.

see more : https://en.wikipedia.org/wiki/Septic_tank

Conclusion

After reading all of the above, I am sure that you are now aware of the importance of emptying your septic tank. The consequences can be very serious if you neglect your tank, so you must ensure that your septic tank is in perfect working order.